KDL-22EX355/32EX355/40EX455 30
SECTION 5 - UPDATES AND ADJUSTMENTS
8.
The latest version is displayed as shown:
Main Micro
SW
VERSION:
SONY_2012_TOSCA_0.07
NVM VERSION:
1.00
BOOT VERSION:
0.01
PANEL VERSION:
v0.003L
PQ
VERSION:
V0.4cL
AQ
VERSION:
AQ0.5000
9.
Do one of the following:
a.
If the latest software is installed, proceed to
Selecting the
Panel ID Code.
b.
If the latest software is not installed, update the software
and then proceed to
Selecting the Panel ID Code.
SELECTING THE PANEL ID CODE
CAUTION: You MUST SELECT THE CORRECT PANEL ID CODE for the
picture to display propertly.
Verify before proceeding to the next step:
;
Verified Status Information
10. Press
to select
Panel Selection
.
Sound Adjust…
>>
Wide Band Tuning
>>
Range Scan…
>>
Self diagnosis history
>>
Status Information…
>>
LVDS Spectrum(%0)
<[
25
]>
Panel Selection
<[
LTY400HM10
]>
SERIAL NUMBER EDIT
8500001
MODEL NAME EDIT
KDL-40EX455
[</>]Set [Home] Exit
Service Mode
11.
Using the table below, press the or on screen cursor
buttons to select the correct
Panel Code
for the Panel ID.
Model Name
Panel Code
Panel Type
Panel ID
KDL-32EX355
KDL-40EX455
LTY400HM10
15_LED_WXGA_CMI_22
17_LED_FHD_SLCD_40
CMO
SLCD
KDL-22EX355
16_LED_WXGA_SLCD_32
SLCD
LTY320AN
V216BG1_LE1
CAUTION: If you do not select the correct Panel ID code, the
picture may not display.
12.
Verify the Panel ID is correct before proceeding to the next step.
13.
Proceed to
Adding the Serial Number.
