58
Locations and Functions of Parts
IXS-6700 Integrated Routing System
Front panel
a
POWER switches
To turn the power on and off. Power units A1 and B1, and
A2 and B2 back up each other. Be sure to set all the four
switches to ON.
b
POWER indicators
These light when power is supplied to the corresponding
power units. The indicators are lit in green when
operations are normal.
If a fan in a power unit stops, the corresponding indicator
will light in red.
It is not a problem that the POWER indicators may
momentarily flash when the power is turned on, nor that
some POWER switches are set to OFF when all the
POWER switches are set to ON while the corresponding
POWER indicators may still be lit in red.
If you set some POWER switches to OFF when all the
POWER switches are set to ON and soon set them to ON
again, the POWER indicators for the power units whose
POWER switches are set to OFF and ON again may
remain lit in red. In such a case, set the POWER switches
for the power units whose POWER indicators are lit in red
to OFF, wait for about 20 seconds until the indicators go
out, then set those POWER switches to ON again.
If you wish to set the POWER switch or breaker to OFF
after setting all the POWER switches to ON, wait for more
than 20 seconds before setting it to OFF.
c
Display window
Shows the current status of the unit.
INTEGRATED ROUTING SYSTEM IXS-6700
MENU
ENTER
CANCEL
POWER A1
POWER A2
POWER B1
POWER B2
a
POWER switches
b
POWER indicators
c
Display window
d
Status indicators
e
Operation buttons
Note