40
US
Telephone Features
One-touch dialing (continued)
Tip
When the phone number of 17 digits or more has been entered, “–” is displayed
next to 15th digit and then the remaining digits are displayed after about 10
seconds.
Erasing a stored name and phone number
1
Display the name and phone number you want
to erase by pressing the one-touch dial button.
2
Press
(ERASE/CLEAR)
.
3
Turn Jog Dial to choose “YES”, and then press
Jog Button.
You will hear a long confirmation beep and the
name and phone number are erased.
Making calls with one-touch dialing
1
Pick up the handset, or press
(SPEAKERPHONE)
.
When you want to select the phone number stored in the
second memory of the one-touch dial button, press
(LOWER)
.
2
Press the desired one-touch dial button.
The phone number stored in the one-touch dial button will
be dialed.
To check the phone number before one-touch dialing
When not making a call, press the desired one-touch dial button. Each
time the button is pressed, the display shows the name, the phone
number, and then the display goes off successively.
To check the phone number stored in the second memory of the one-
touch dial button, first press
(LOWER)
and then press the one-touch
dial button.
The number stored in the button appears on the display for 20 seconds.
To dial the number, pick up the handset or press
(SPEAKERPHONE)
while the number is displayed.
Note
When there is no name stored to a one-touch dial button, “NO NAME”
appears on the display. The display shows “NO DATA” when there is no
phone number stored.
Tip
When the phone number of 17 digits or more has been entered, “–” is displayed
next to 15th digit and then the remaining digits are displayed after about 10
seconds.
ERASE ? YES NO
