XIS-10DC
P
repa
ra
tions
Connecting the Camera to Network
13
4
Select the
Use the camera
checkbox for the camera
you want to use, then enter the IP address and port
number.
The IP address and port number to be entered for
the panorama camera should be the same as those
registered for the XIS-NT10 in the IP Setup
Program, and the IP address and port number for
the zoom camera should be the same as those for
the SNC-RZ30N/P.
5
Click the
Apply
button, and click
OK
when the
message “Saved” appears.
6
Click the
Close
button to close the
Camera
information
dialog.
7
To exit the Administrator Tool, click the
Close
button or select
Exit the application
under
File
on
the menu bar.
To connect the camera via a proxy server
Set the proxy server on Administrator Tool.
1
Select
System setting
under
Tool
on the menu bar.
The
System setting
dialog appears.
2
Select the
Communication setting
tab.
3
Select the
Use a proxy server between camera
and server
checkbox and enter the IP address and
port number of the proxy server.
4
Click the
Apply
button, and click
OK
when the
message “Saved” appears.
Summary of Contents for Ipela XI's XIS-10DC
Page 53: ...XIS 10DC Sony Corporation ...
