O
per
at
ing
t
he
SNT
-V
704
Operating the Camera from the Image Control Section (BRC-300, EVI-D100, EVI-D70, and cameras not manufactured by Sony only)
21
Operating the Camera
from the Image Control
Section
(BRC-300, EVI-D100,
EVI-D70, and cameras not
manufactured by Sony only)
You can operate the camera connecting to this unit from
the image control section on the main viewer page.
For this function, user access right
Level 2
to
Level 4
is
required (see page 39).
Click
Control
on the menu section to display the
camera control parts.
Image control section (camera control parts)
Selecting the Camera You Want to
Control
First, press one of the numeric buttons 1 to 4 of the
monitor image display parts to select the image of the
camera you want to control (BRC-300, EVI-D100 or
EVI-D70 only). When QUAD is selected, the monitor
image cannot be controlled with the image control
section.
Panning and Tilting
You can pan and tilt the camera using the 8-direction
arrow buttons or the tablet.
Setting the pan/tilt mode
Click
. Each click alternates the 8-direction
arrow mode and the tablet mode.
Panning and tilting using the 8-direction
arrow buttons
Observe the monitor image and click the arrow button
indicating the direction in which you want to move the
camera. The camera moves and the monitor image
follows.
Hold down the arrow button to move the direction of the
camera continuously.
Click
to return the camera to the factory-preset
default position.
Notes
• If the Exclusive control mode menu on the System
setting page is set to
On
(see page 28), the remaining
operation time is displayed instead of
.
• You can change the operation mode of the panning and
tilting using the 8-direction arrow buttons from the
Camera control mode setting section on the Camera
setting page (see page 33). When you have changed
the operation mode, click
Control
on the menu
section to update the operation mode setting on the
image control section.
Panning and tilting using the tablet
When you click
PT MODE
, the 8-direction arrow
buttons change to a tablet. The tablet represents the
monitor image.
A click on the tablet moves the direction of the camera
so that the clicked position goes to the center of the
monitor image.
If you want to change the direction of the camera further,
click on the tablet and drag in the direction in which you
want to move the camera. The direction of the camera
moves as you drag. Hold down the button to move the
direction of the camera continuously.
