A
d
mini
s
tra
ting
t
he
un
it
Recording Images in Memory — Image memory Menu
69
Common Tab — Setting the image
memory function
Image memory
To use the image memory function, select
On
.
Selected root directory
Select a memory in which you want to save an image.
The current memory space is displayed on the right.
Built-in memory:
Built-in memory of this unit
USB memory:
USB memory inserted into the unit
Notes
• The image and audio files recorded in the built-in
memory are deleted when the
Selected root directory
setting is changed.
• When
Selected root directory
is set to an option other
than
Built-in memory
, “empty” is displayed in the
memory space box and you cannot access the built-in
memory.
• The USB memory option is not available on the
SNT-EP104, SNT-EX154 and SNT-EP154.
Overwrite
Select
On
to overwrite the file when there is insufficient
memory space to record the image in the built-in
memory or USB memory.
On:
Overwrite is enabled and old files will be
overwritten in the order of date.
Off:
Overwrite is prohibited. No recording will be
performed.
Capacity warning
Select
On
to send a warning mail to the Administrator
when the memory space of the built-in memory or CF
memory card is low or the memory is full. Select
Off
if
you do not want to send a warning mail.
On:
A warning mail is sent to the Administrator.
Off:
A warning mail is not sent to the Administrator.
Note
When
Overwrite
is set to
On
, a warning mail is not sent
to the Administrator.
SMTP server name
Type the name of the SMTP server for sending an e-
mail, using up to 64 characters.
Otherwise type the IP address of the SMTP mail server.
SMTP port number
Select the textbox and enter a port number from 25 to
65535.
Use TLS
To use the encryption function by TLS, select
On
.
Note
TLS is not featured in the models to Chinese markets.
STARTTLS
To use the encryption function by STARTTLS, select
On
.
Note
STARTTLS is not featured in the models to Chinese
markets.
Authentication
Select whether authentication is required when you send
an e-mail.
Off:
No authentication is required when an e-mail is
sent.
On:
Authentication is required when an e-mail is sent.
Select one of the authentication methods from the
following and specify the
POP server name
,
User
name
and
Password
as required.
SMTP:
SMTP authentication is required.
POP before SMTP:
POP before SMTP
authentication is required.
Note
When you set
Authentication
to
On
, be sure to select
either or both
SMTP
or/and
POP before SMTP
.
POP mode
Select POP3 or APOP (encrypted authentication).
Note
APOP is not featured in the models to Chinese markets.
Waiting time after POP authentication
Set the timeout duration. Timeout duration can be set
from 1 to 10000 msec.
