Ot
he
rs
When using Windows Vista
54
Configuring Windows Firewall
The IP Setup Program may not operate correctly
depending on the configuration of Windows Firewall.
(No cameras are shown in the list even if they are
detected.) In this case, confirm the Windows Firewall
configuration as follows:
Example: In case of IP Setup Program
1
Select
Control Panel
from the Start menu of
Windows.
2
Click
Windows Firewall
.
3
Select
Turn Windows Firewall on or off
.
“User Account Control – Windows needs your
permission to continue” may appear. In this case,
click
Continue
.
4
Select
Off
in the “General” tab.
The cameras will be displayed in the list.
If you want to keep Windows Firewall
On
, continue
with the following steps.
5
Select the “Exceptions” tab.
6
Select
Add Program…
.
7
If the Add Program dialog appears, select
IP Setup
Program
and click
OK
.
Then the IP Setup Program is added to the Program
or port list.
8
Click
OK
.
