A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera setting Menu
40
Click the left button of the mouse on the still image
and drag it diagonally. The red frame that appears
as you drag indicates the cropping area.
4
Click
OK
at the bottom of the window.
The cropped image is displayed on the main viewer.
5
To close the image, click
in the upper-right
corner.
Color
Select
Color
or
Monochrome
for the image.
Microphone
Select whether you send the audio from the built-in
microphone or the
m
microphone input connector.
Select
On
to send the audio from this network camera.
Note
When you change the Microphone setting, click
Refresh
of the Web browser to reflect the change in the
opening main viewer page.
Mic volume
Set the volume level of the audio input from the built-in
microphone or the
m
microphone input connectors. It is
adjustable from
–10
to
+10
.
Audio codec
Select the bit rate when you send the audio from the
built-in microphone or the
m
microphone input
connectors.
G.711 (64kbps)
,
G.726 (40kbps)
,
G.726
(32kbps)
,
G.726 (24kbps)
or
G.726 (16kbps)
can be
selected.
Note
When the bit rate is set to other than G.711(64bps), the
audio is not output in the case you are using Java applet
viewer.
Speaker output
Set whether you output the audio which is input to the
audio input connectors of your computer to the speaker
(active speaker for example) connected to the camera
line output connectors by using SNC audio upload tool
included in the supplied CD-ROM.
Select
On
to accept the audio data transmission from
SNC audio upload tool.
OK/Cancel
See “Buttons common to every setting menu” on page
34.
Picture Tab
You can set the color condition, exposure, etc. of the
camera.
White balance
Select the white balance mode from among
Auto
,
Indoor
,
Outdoor
,
One push WB
, and
Manual
.
Auto:
to automatically adjust the white balance
Indoor:
to adjust the white balance for shooting indoors
(about 3200 K)
Outdoor:
to adjust the white balance for shooting
outdoors (about 5800 K)
One push WB:
The
One push trigger
button is
displayed. Click the button to adjust the white
balance instantly.
Manual:
When you select this,
R gain
and
B gain
are
displayed and you can set them.
Selectable gain values are from 0 to 255.
Exposure mode
Select the exposure mode of the camera from among
Full auto
,
Shutter priority
,
Iris priority
, and
Manual
.
The setting items required for each setting appear.
Still image
Red trimming
frame
Click the left button of the mouse on
the still image and drag it.
