A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera setting Menu
33
Note
The selected frame rate and bit rate are a tentative value.
The actual frame rate and bit rate may be different
according to the image size, the shooting scene or the
network condition.
I-picture interval
Set the I-picture inserting interval of MPEG4. I-picture
is the compression data serving the basic point when the
data compressed by MPEG4 is depressed. In the
condition that errors tends to occur, such as the network
environment variation, the distortion of the image is
reduced by selecting a small value. The selectable values
are 1, 2, 3, 4 and 5 seconds.
Auto rate control
This function adjusts the frame rate and the bit rate
automatically so that the camera plays a smooth image
to suit the connected computer environment. If
On
is
selected, the rate of MPEG4 image is automatically
adjusted.
Note
The maximum transmission rate will be the values set in
Frame rate
and
Bit rate
.
OK/Cancel
See “Buttons common to every setting menu” on page
26.
JPEG Tab
Frame rate
Set the maximum frame rate of JPEG image that can be
monitored on the computer.
The selectable frame rates are the following:
SNC-DF40N:
5, 6, 8, 10, 15, 20, 25, 30 fps
SNC-DF40P:
5, 6, 8, 10, 15, 20, 25 fps
“fps” is a unit indicating the number of frames
transmitted per second.
Image quality
Set the quality of JPEG image.
Selectable values are from
Level 1
to
Level 5
.
Selecting level 5 gives the image with the highest
sharpness.
Bandwidth control
When the video mode is set to JPEG, the network
bandwidth can be limited. Selectable bandwidths are
0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, and Unlimited
Mbps. When you do not wish to limit the bandwidth,
select
Unlimited
.
OK/Cancel
See “Buttons common to every setting menu” on page
26.
Reset Tab
Reset camera menu
Click
Reset
, and the message “Camera menu setting is
reset to default. Are you sure?” is displayed. To reset to
default, click
OK
.
