184
Recording during a Communication
Recording during a Communication
You can record the voices of participants on both the remote and local sites
during a communication if you connect an audio recorder to the REC OUT
jack on the Communication System.
This is convenient for taking minutes of the communication.
To connect an audio recorder
When recording with an audio recorder
When an audio recorder is connected to both the AUDIO IN and REC OUT
jacks, set “Recording Mute” to “On” on the Basic Setup1 page of the Audio
setup menu, since the echo may cause and is transmitted to a remote party
(page 77).
To record the sound output from the REC OUT L/R jacks in 2-channel
monaural, set “REC OUT Mode” to “Monaural 2ch” on the Basic Setup2 page
of the Audio setup menu.
TERMINAL
VISCA OUT
1
1(R)
(PLUG IN POWER)
2(L)
R
L
R
L
R
L
2
S VIDEO IN
RGB IN
RGB OUT
HDMI OUT
1-EXT-2
REC OUT
AUDIO OUT
AUDIO 1 IN
AUX CONTROL
2
CAMERA
EC-MIC(A7)
MIC(A1/A3)
1
DC 19.5V
ISDN UNIT
to audio
inputs
Audio recording device
Audio cable (not supplied)
to REC OUT L/R
Summary of Contents for IPELA PCS-XG55
Page 282: ...Sony Corporation ...
