183
Using a Second Camera
C
hap
te
r 4:
C
o
n
nec
tio
n
w
ith
O
p
tio
nal
Equ
ipm
en
t
Using a Second Camera
You can connect the second camera through the PCSA-CXG80 Camera Unit.
Connection example for a second camera
Connect the video output connector on the second camera to the VIDEO IN
YPbPr jacks on the front of the Communication System or the S VIDEO IN or
RGB IN connector at the rear.
The S VIDEO IN connector is not available on the PCS-XG55/XG55S.
Select “YPbPr”, “S-VIDEO” or “RGB” in “Second Camera Input” of the
Camera setup menu depending on the connector to which the camera is
connected.
• The “S-VIDEO” setting is not available on the PCS-XG55/XG55S.
• The PCS-XA80/XA55 does not support the use of a second camera.
To switch the picture shot by two cameras
When you open the Camera menu, the instruction “F2: Switches to the first
camera.” or “F2: Switches to the second camera.” is displayed at the bottom of
the monitor screen. Each press of the F2 button on the Remote Commander
changes the picture shot by each camera.
For the procedure how to open the Camera menu, see “Adjusting the Camera”
on page 146.
Note
Notes
TERMINAL
VISCA OUT
/
OPEN
VIDEO IN
AUDIO 2 IN
MAINTENANCE
Y
Pb
Pr
L
R
VISCA cable
(not supplied)
to VISCA OUT
to VISCA IN
Second camera
to Video
output
(YPbPr)
Video cable (not supplied)
to VIDEO IN
YPbPr
First camera (PCSA-CXG80)
Summary of Contents for IPELA PCS-XG55
Page 282: ...Sony Corporation ...
