56
Registering Local Information
Function Keys in
Communication
Allows you to switch the picture with one
press of a button on the Remote
Commander.
You can set the function to be assigned to
each of the F1 to F4 (function) buttons.
You cannot set “Function Keys in
Communication” during communication. Set
this item before starting communication.
F1
Allows you to select the video input
switched by pressing the F1 button on the
Remote Commander. You can select from
among “Far/Near”, “Camera”, “HDMI-
IN(PC)”, and “No Operation”.
This item is preset to “Far/Near” at the
factory. This setting allows you to switch the
cameras to be controlled between the local
and remote sites during communication by
pressing the F1 button on the Remote
Commander.
Even if “F1” is set to any option other than
“Far/Near”, “F1” is fixed to “Far/Near” while
the Video Input or Layout menu is displayed on
the screen. In some other cases, the function of
the F1 to F4 buttons may be fixed regardless of
the setting for practical convenience, in which
case the functions of the button are shown in
the instruction display.
F2
Allows you to select the video input
switched by pressing the F2 button on the
Remote Commander. You can select from
among
“Far/Near”,
“Camera”, “HDMI-
IN(PC)”, and “No Operation”.
F3
Allows you to select the video input
switched by pressing the F3 button on the
Remote Commander. You can select from
among
“Far/Near”,
“Camera”, “HDMI-
IN(PC)”, and “No Operation”.
F4
Allows you to select the video input
switched by pressing the F4 button on the
Remote Commander. You can select from
among
“Far/Near”,
“Camera”, “HDMI-
IN(PC)”, and “No Operation”.
Home Menu1
Allows you to select the items that show or
hide in/from the Home menu.
Some items may not be set during
communication.
Clock Display
On:
Allows display of the current time in the
Home menu.
Off:
Does not display the current time.
Local Terminal Name
On:
Displays the local terminal name in the
Home menu.
Off:
Does not display the local terminal
name.
Number Display
Allows you to select the identification of the
local system, such as the IP address and user
name, to be displayed in the Home menu.
SIP:User Name:
Displays the user name
registered in the SIP server.
SIP:Address:
Displays the SIP address.
GK:User Alias:
Displays the user name
registered in the gatekeeper when you
use the gatekeeper.
GK:User Number:
Displays the user
number registered in the gatekeeper
when you use the gatekeeper.
NAT:Address:
Displays the NAT address
when you connect the system to a
network using NAT.
IP: Address:
Displays the IP address.
No display:
Does not display any
identification, such as the IP and user
name, for the system.
Note
Note
General4
Home Menu Setup Menu
Note
Home Menu1
Summary of Contents for Ipela PCS-XC1
Page 190: ...Sony Corporation ...
