81
Starting a Conference by Calling a Remote Party
Ch
a
p
te
r
3
: Da
ily
V
id
e
o
c
o
n
fe
re
n
c
e
This chapter describes how to conduct a videoconference from start to finish
after the administrator has completed various registrations and settings for the
system.
The videoconference explained here is a point-to-point conference via a LAN
connection or ISDN connection using the optional PCSA-B384S or PCSA-
B768S ISDN Unit.
For use of a “Memory Stick” or optional equipment, see Chapter 4.
To conduct a data conference using the optional PCSA-DSB1S Data Solution
Box, see Chapter 5.
To conduct an encrypted conference, see Chapter 6.
To conduct a multipoint conference, see Chapter 7.
To conduct a videoconference using SIP, see Chapter 8.
Starting a Conference by Calling a
Remote Party
You can start a videoconference with a remote party by dialing. Once you have
made a connection to the remote party, you can begin talking just as with a
normal phone call and start a videoconference.
1
Turn on equipment you are using for the videoconference.
2
Press
1
(power) switch on the right side of the system.
The indicator of the switch lights in green and the system turns on.
Chapter 3: Daily
Videoconference
Turning on the Power
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
