211
Using as Video Monitor
C
h
a
p
te
r 9:
U
s
e as
C
o
m
p
u
te
r D
is
p
la
y
or
Vi
deo
M
o
ni
to
r
Some commercially available VCRs and DVD players do not conform to the output
signal standards. The picture of such video equipment may not be displayed correctly
on the Video Communication System.
If you receive a call when you are viewing the picture from the video
equipment on the display, the system automatically enters the Picture-in-
Picture mode and the picture of the remote party is displayed as a window
picture.
You can change the display mode manually using the following buttons.
To change the location of the window picture of videoconference
Press the PinP button on the Remote Commander.
To display the picture of videoconference only
Press the VIDEO CONF button on the Remote Commander.
Press the PC/VIDEO button again to display the picture from the video
equipment only.
To display the picture of videoconference and the picture from the video
equipment simultaneously
Press the PandP button on the Remote Commander and change the “Display”
setting (“Far” or “Near”) in the Display Control menu.
The picture from the video equipment is displayed on the left (main picture)
and the picture of the videoconference is displayed on the right (sub picture).
To change the remote picture of videoconference to the local picture
Press the FAR/NEAR button on the Remote Commander.
Display mode shown when the pictures are switched
When you switch the picture(s) on the display using the Remote Commander,
the selected display mode is shown at the bottom of the display for one second.
For details of the video mode, see “Display mode shown when the pictures are
switched” on page 208.
Note
Displaying the Picture from the Video Equipment during
Videoconference
Picture on the remote site
Picture from the video
equipment
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
