170
Starting a Multipoint Videoconference
5
Repeat steps 2 and 3 to call other remote parties.
To call the second and other remote parties not registered in the
One Touch Dial list
When you press the CONNECT/DISCONNECT (
/
) button on the
Remote Commander, the submenu in step 3 appears. Select “Phone Book” to
open the Phone Book, or “Detailed Dial” to open the List Edit menu.
Perform steps 1-4 of the procedure shown in “Calling Remote Parties by
Selecting from the Phone Book” on page 171 or steps 1-4 of the procedure in
“Calling Remote Parties not Registered in the Phone Book” on page 172
depending on the registration status of each remote party.
1
Select the multipoint connection list registered in the Phone Book.
The multipoint connection lists are marked with “
”.
2
Press the CONNECT/DISCONNECT (
/
) button on the Remote
Commander, or press the ENTER button to display the submenu, press the
V
or
v
button to select “
Dial”, then press the ENTER button.
Calling Remote Parties Registered in the Multipoint Connection
Lists
1st remote party
2nd remote party
Picture on the local site
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
