107
Adjusting the Camera
Ch
a
p
te
r
3
: Da
ily
V
id
e
o
c
o
n
fe
re
n
c
e
6
Press the ENTER button.
The setting is registered in the selected preset number.
You can move the camera to the preset position by recalling the preset zoom
and camera angle with the display screen while in communication. You can do
the same with the launcher menu displayed while not in communication. Using
the Camera menu also enables movement of the camera to the preset position.
To recall the preset setting in the display screen while in communication
1
Select the camera which you want to move to the preset position.
Press the FAR/NEAR button on the Remote Commander to open the Display
Control menu, then select “Far” or “Near” under “Control”.
2
Press one of the number buttons 1–6 on the Remote Commander.
The setting of the selected preset number is recalled, and the camera moves to
the preset position. The message “Preset 1 (-6) selected” appears.
To recall the preset setting in the launcher menu while not in
communication
You can move the local camera to the preset position.
1
Select the screen in the launcher menu, then press the ENTER button.
2
Press one of the number buttons 1–6 on the Remote Commander.
The setting of the selected preset number is recalled, and the camera moves to
the preset position. The message “Preset 1 (-6) selected” appears.
To recall the preset setting in the Camera menu
1
Display the Camera menu.
2
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select “Preset
Load”, then press the ENTER button.
Recalling the Preset Zoom and Angle Setting
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
