136
Starting a Multipoint Connection
Starting a Multipoint Connection
To call remote parties registered in the multipoint connection lists
1
Select the multipoint connection list registered in the Phone Book or Direct
Phone Book.
The multipoint connection lists are marked with “
”
.
2
Press the CONNECT/DISCONNECT (
/
) button on the Remote
Commander, or press the PUSH ENTER button to display the submenu,
press the
V
or
v
button to select “
Dial”, then press the PUSH ENTER
button.
The system begins dialing the numbers of the remote parties registered in the
multipoint connection list. “Dialing” appears on the monitor screen.
When the system connects to all the remote points, the message “Session
Connected” appears on the screen, and the ON LINE indicator stops blinking
and lights in blue.
To call remote parties by selecting from the Phone Book or Direct Phone
Book
1
Select a remote party to which you want to connect for a multipoint
connection from the Phone Book or Direct Phone Book.
2
Press the
button on the Remote Commander, or press the PUSH
ENTER button to open the submenu, press the
V
or
v
button to select “
On”, then press the PUSH ENTER button.
Calling Remote Parties
Phone Book
Cancel
2005.12.28 12:34
0-9
A-I
J-S
T-Z
New Entry
Recent
Room 10A
Room 16A
Room 11B
Room 16B
Room 12A
Room 17A
Room 12B
Room 18A
D i a l
O n
Edit
C o py
Delete
Cancel
