104
Selecting the Input Picture and Sound
To change the video input name displayed on the monitor screen
You can label the desired name for each video input using “Custom Input
Label” in the Video Setup menu. When you switch the video input, the video
input name you set is displayed on the monitor screen.
You can switch the sound sent to the remote party between the sound from the
microphone and that from the connected equipment. Use “Input Select” in the
Audio Setup menu.
For details on the “Input Select” setting, see the Audio Setup Menu on page
41.
Set “Link to Audio Input” to “On” in “Video Input” page of Video Setup
Menu. When you switch the video input, the audio input automatically
switches to the one which has been set to link to the switched video input.
For details on the “Video Input/Output”setting, see the Video Setup Menu on
page 43.
Switching the Sound to Be Sent to the Remote Party
Switching Video and Audio simultaneously