Sony Ipela PCS-G50, Operating Instructions Manual, Page: 169 / 259

169
Connection Examples for a Multipoint Videoconference
Connection Examples for a Multipoint
Videoconference
Installing the optional PCSA-M3G50 H.323MCU software in a
Communication Terminal allows you to conduct multipoint videoconferences
with up to six points.
If you are already conducting a two-point videoconference when a third point
call, the system automatically opens a multipoint conference.
For a multipoint videoconference only the Communication Terminal in which the
PCSA-M3G50 H.323 MCU software can be installed is used as main terminal.
Using the LAN Connection (Up to 6 Points)
Note
POWER
POWER
POWER
POWER
POWER
TERMINAL VISCA OUT
(MIXED) AUX
AUX MONITOR
LINE
AUX CONTROL
VIDEO OUT
AUDIO OUT AUDIO IN
MIC
VIDEO IN
EC-MIC
CTRL-S
RGB OUT DSB
ISDN UNIT
IR OUT
1 2
1 2
1 2
1 2
DC 19.5V
CAMERA AUX IN
WHITE
BOARD
100BASE-TX/
10BASE-T
(PLUG IN POWER)
LAN
PCSA-M3G50
H.323 MCU
software
to 100BASE-TX/
10BASE-T
UTP cable (category 5, straight)
(not supplied)
to LAN