100
Configuring System Alert Settings
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
4
Configure the action to perform after a system alert
occurs.
For details on actions, refer to
Setting Items of the [System Alert] Tab
This tab is displayed by clicking [Server] in the
[Configuration] window, and clicking the [System Alert]
tab.
After configuring each item, click [Apply].
A
VIDEO LOSS
Select the check box to notify of the image signal
becoming disconnected.
Disconnection of the audio signal is not a target for
detection.
Camera List
This displays a list of the video loss notification settings.
Target
Select the check boxes for the cameras to be target for
notification.
Camera
This displays a list of the names of the cameras
registered to NSR.
B
Disk Usage
Select the check box to notify of insufficient remaining
disk space.
Target Storage List
Select the check boxes for the storage to be target for
notification.
Target
Select the check boxes for the storage to be target for
notification.
Capacity
This displays the capacity of the storage.
This item cannot be changed.
Free (%)
This displays the amount of free space as a percentage.
Free
This displays the amount of free space in gigabytes.
Total
This displays the total size of the storage.
Remaining Space
Enter the remaining space limit at which to send
notification as a percentage or in gigabytes.
C
Record Count
Select the check box to notify of the record count
exceeding a specified amount.
If you select this check box, enter the percentage of the
maximum record count that the current record count needs
to reach for notification to be sent.
Current/Max. Record Count
This displays the current record count and the
maximum record count.
D
Apply
This saves the settings.
E
Cancel
This cancels the changes to the settings.
The hardware errors and recording errors of NSR are
included in the system alerts, and notification always
occurs regardless of the settings.
Note
D E
C
A
B
Caution
Summary of Contents for IPELA NSR Series
Page 137: ......