Sony Ipela NSR-1100, Installation Manual

Page: 29 / 336

Connection Examples
29
Notes
• Do not connect the monitors to HDMI monitor
connectors 1 and 2.
• Do not connect a monitor to monitor connector 1 on
the front of the unit while the unit is on.
Example 3) When connecting an HDMI monitor
and analog RGB monitor (HDMI monitor used
for operations)
: Audio output locations.
Notes
• Do not connect a monitor to HDMI monitor connector
2.
• When using HDMI monitors, be sure to connect the
HDMI monitor and turn it on before turning on the
unit.
Example 4) When connecting an HDMI monitor
and analog RGB monitor (analog RGB monitor
used for operations)
: Audio output locations.
Notes
• Do not connect a monitor to HDMI monitor connector
1.
• Do not connect a monitor to monitor connector 1 on
the front of the unit while the unit is on.
NSRE-S200 Connection Example
You can connect up to seven optional NSRE-S200 units
to the NSR-1200/1100/1050H in the following tree
configurations.
Note
The mini-SAS cable used for connection is supplied
with the NSRE-S200.
Connect NSRE-S200 expansions in the following order.
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
Audio amplifier
(connect to
audio output
connectors
(L/R))
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
Audio amplifier
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
2
4 6 7 5
3
1
NSRE-S200
NSRE-S200
NSRE-S200
NSR-1200/1100/1050H