Sony Ipela NSR-1100, Installation Manual

Page: 28 / 336

Connection Examples
28
Caution
When you connect a USB device to the unit, the
[ERROR] lamp at the bottom right of the “Main” screen
may light. This indicates that the unit may not support
the USB device. For details see “Usage Precautions”
(page 3) or “An external device connected to a USB
connector does not work.” (page 33) in the
“Troubleshooting” section.
When Using RealShot Manager
Advanced as a Remote Client
Perform the following to confirm operations.
1
Log on to RealShot Manager Advanced.
• Specify the server during logon. Specify port
“8082” for Server IP address.
• Enter the user name and password configured in
the Server Configuration screen (page 26) for the
[User Name] and [Password].
2
In the main screen of RealShot Manager Advanced,
assign images to monitor frames from cameras
connected to the unit.
Two methods are available for assigning cameras.
• Drag and drop a camera connected to the unit
from the Cameras pane to a monitor frame.
• Click a monitor frame to select it, and then
double-click a camera from the Cameras pane.
3
Confirm that images from the camera selected in
step 2 appear in the monitor frame.
Connection Examples
Monitor Connection Examples
This unit supports several combinations of monitor
connection. Refer to the following connection examples.
Note
You can select whether to output RCA audio or HDMI
audio in the Audio screen of the Setup Wizard or Setup
menu.
Example 1) When connecting two HDMI
monitors
: Audio output locations.
Note
Be sure to connect the HDMI monitors and turn them on
before turning on the unit.
Example 2) When connecting two analog RGB
monitors
: Audio output locations.
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
Audio amplifier
POWER 1 2 3 NETWORK 1 2 3 4 HDD 1 2 3 4 ERROR STATUS REC
Audio amplifier