Ot
her
s
Using the Supplied Setup Program
72
Others
This section explains how to use the application
software and commands, including the supplied CD-
ROM.
Using the Supplied
Setup Program
Explains the functions except those of the Network tab
in the IP Setup Program.
To install the Setup Program, to assign an IP address and
to set the network, see “Assigning the IP Address to the
Camera” on page 7 in “Preparation”.
Notes
• The Setup Program may not operate correctly if you
use a personal firewall or antivirus software in your
computer. In that case, disable the software or assign
an IP address to the camera using another method. For
example, see “Assigning the IP Address to the Camera
Using ARP Commands” on page 85.
• If you are using Windows XP Service Pack 2 or
Windows Vista, disable the Windows Firewall
function. Otherwise the IP Setup Program will not
operate correctly. For the setting, see “Configuring
Windows Firewall” in “When using Windows XP
Service Pack 2” on page 10 or “Configuring Windows
Firewall” in “When using Windows Vista” on
page 12.
Starting the Setup Program
Select
Program
from the Start menu of Windows, then
select
Program
,
IP Setup Program
and
IP Setup
Program
in sequence.
The IP Setup Program starts and the Network tab
appears. The IP Setup Program detects cameras
connected to the local network and lists them on the
Network tab window.
When you are using Windows Vista, message “User
Account Control – An unidentified program wants
access to your computer” may appear. In this case, click
Allow
.
Bandwidth control Tab
You can set the communication bandwidth for the JPEG
image.
Note
The bandwidth cannot be controlled for the
MPEG4
or
H.264
image.
1
Click the Bandwidth control tab to display the
bandwidth setting window.
The current bandwidth is displayed in
Current
bandwidth
.
2
Click to select the camera to set the bandwidth from
the list box.
3
Click to select the desired bandwidth from the
Setting bandwidth
list box.
4
Type the
Administrator name
and
Administrator
password
in each box.
The factory settings of both items are “admin.”
5
Click
OK
.
If “Setting OK” is displayed, the bandwidth setting
is completed.
