A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory Menu
57
Periodical recording Tab — Setting
the periodical recording mode
You can set to record the image file (JPEG file)
periodically.
Periodical recording
Select
On
when you want to use periodical recording.
Image file name
Type the file name of the image to be recorded to the
memory using up to 10 alphanumeric characters, -
(hyphen) and _ (under score).
The actual image file name will be the specified image
file name with the a suffix and the extension .jpg.
Note
You cannot record the audio file using the periodical
recording function.
Suffix
Select a suffix to be added to the file name.
None:
The recording file name will be the image file
name.
Date & time:
The date & time suffix is added to the
image file name.
The date/time suffix consists of lower two-digits of
the year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits),
and consecutive number (2 digits), thus adding a 14-
digit number to the image file name.
Sequence number:
A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 are added to the image file name.
Sequence number clear
Click
Clear
to reset the
Sequence number
suffix to 1.
Interval
Type the interval at which you want to record an image
in the memory periodically. You can set the hour (H),
minutes (M) and seconds (S) between 1 second and 24
hours (one day).
Note
The actual interval may be longer than the set value
depending on the image size, image quality, bit rate, or
reocording media.
Effective period
Set the period during which the periodical recording is
effective.
Always:
The periodical recording is always effective.
Schedule:
You can specify the period during which the
periodical recording is effective.
Click
Schedule
and the menu for the effective period
is displayed. (“Setting the Schedule — Schedule
Menu” on page 63)
OK/Cancel
See “Buttons common to every menu” on page 26.
Folder structure of image memory
When the image memory function is used, the images
are recorded with the following folder structure.
A
represents a folder created automatically.
The Date_No. folder has a 11-digit name consisting of
the last two digits of the year (2 digits), month (2 digits),
day (2 digits), underscore and sequence number (4
digits).
In the built-in memory, one folder automatically created
can store image files of about 1 MB. If the size of the
image files exceeds that value, a new folder is created
automatically to continue recording.
Note
When the CF memory card is used for the SNC-DF85/
DF80, the folder size varies depending on the capacity
of the CF memory card.
xxxxxxx.jpf
yyyyyyy.jpf
aaaaaaa.jpg
bbbbbbb.jpf
ccccccc.jpf
zzzzzzz.m4f
qqqqqqq.m4f
Root
Date_No.
Date_No.
