A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the System — System Menu
29
To store the HTML file of the homepage in the built-
in flash memory, use the Custom Homepage Installer
included in the supplied CD-ROM.
To learn how to use of the Custom Homepage
Installer, see page 83.
For the verified cards, contact your authorized Sony
dealer.
To display your individual homepage, perform the
following operation:
1
Select
Custom
.
2
Type the path of the HTML file using up to 64
characters in the text box on the right of
Path
.
For the SNC-DF85/DF80, select the memory in
which the homepage is stored.
You can select
Flash memory
or
CF memory
card
.
The directory displayed in the text box on the right
of
Path
changes according to the selected memory.
Tip
Even when you select
Custom
, the homepage inside the
camera can be displayed by typing the following URL in
the address box of your Web browser.
Example: When the IP address of the camera is set to
192.168.0.100
http://192.168.0.100/en/index.html
Sensor input mode
Specify the detection mode of the signal input to the
sensor input terminal of the camera.
Normally open:
Detects alarm when the sensor input is
short-circuited.
Normally closed:
Detects alarm when the sensor input
is open-circuited.
OK/Cancel
See “Buttons common to every menu” on page 26.
Date & time Tab
Current date & time
Displays the date and time set on the camera.
Note
After you have purchased the camera, be sure to check
the date and time of the camera and set them if
necessary.
PC clock
Displays the date and time set on your computer.
Date & time format
Select the format of date and time to be displayed in the
main viewer from the drop-down list.
You can select the format between
yyyy-mm-dd
hh:mm:ss
(year-month-day hour:minute:second),
mm-
dd-yyyy hh:mm:ss
(month-day-year
hour:minute:second), and
dd-mm-yyyy hh:mm:ss
(day-month-year hour:minute:second).
Adjust
Select how to set the day and time.
Keep current setting:
Select if you do not need to set
the date and time.
Synchronize with PC:
Select if you want to
synchronize the camera’s date and time with those of
the computer.
Manual setting:
Select if you want to set the camera’s
date and time manually.
Select the year, month, date, hour, minutes and
seconds from each drop-down list.
Synchronize with NTP:
Select if you want to
synchronize the camera’s date and time with those of
the time server called NTP server (Network Time
Protocol). Set the
NTP server name
and the
Interval
.
