Sony ILME-FR7 Help Manual Download Page 28

Page: 28 / 458

Help Guide

Interchangeable Lens Digital Camera

ILME-FR7 / ILME-FR7K

Side View

This topic describes the location and function of parts on the side of the unit.

Hint

This description refers to the illustration of the unit without an attached lens.

Pan/tilt lock lever

Locks the pan/tilt mechanism of the unit. Use in the following cases.

When transporting or packing the unit.
When attaching or removing a lens. For details, see “

When using a lens that does not support pan/tilt operation (such as Sony SEL100400GM / SEL200600G /
SEL400F28GM / SEL600F40GM lenses).

Hint

The pan/tilt movement can be fixed at the following angles.

Summary of Contents for ILME-FR7




















































































































































































































































































































































































































































Search results

Summary of Contents for ILME-FR7

Reviews:

Related manuals for ILME-FR7

Brands by name

Popular brands

Sony ILME-FR7, Help Manual

Search results

Summary of Contents for ILME-FR7

Reviews:

Related manuals for ILME-FR7

Brands by name

Popular brands