Sony ILCE-6300, Instruction Manual

Page: 25 / 547

GB
25
GB
x Control wheel
DISP (Display Contents): Allows you to change the screen display.
ISO (ISO): Allows you to set the sensitivity based on the brightness.
(Image Index): Allows you to view multiple images in a single-image
screen at the same time.
(Exposure Comp.): Allows you to compensate the exposure and brightness
for the entire image.
(Drive Mode): Allows you to switch between shooting methods, such
as single shooting, continuous shooting, self-timer shooting or bracket
shooting.
z (Focus Standard): If you press this key when the [Focus Area] is set to
[Zone], [Flexible Spot], or [Expand Flexible Spot], you can change the
position of the focus area by pressing
v
/
V
/
b
/
B
on the control wheel. Also,
you can change the position of the focus area while shooting still images.
Depending on the options selected in [Focus Area] or [Center Lock-on AF],
the available functions varies when pressing the key.
x Fn (Function) button
Allows you to register 12 functions and recall those functions when shooting.
1 Press the Fn (Function) button.
2
Select the desired function by pressing v / V / b / B on the control wheel.
3
Select the setting value by turning the control wheel.
x
Control dial
You can instantly change the appropriate setting for each shooting mode just
by turning the control dial.
Introduction of other functions
Control wheel
Control dial
AF/MF/AEL
switch lever
MENU
Fn (Function)