Sony ICD-UX502 Operating Instructions Manual Download

Page: 38 / 106

Playing Files

ModelName: ICD-UX502

PartNumber: 4-421-477-11

Changing the Playback Settings

Reducing noise in the playback sound and making the human voice

clearer – the noise cut function



STOP

MENU/NOISE CUT



/ENT





When the noise cut function is effective in the playback mode, ambient noise

other than the human voice is reduced. A file is played back with clear sound

quality because the noise of all frequency bands including a human voice is

reduced.

To set the noise cut level



In the stop or playback mode, press and hold

MENU/NOISE CUT for approximately 2 seconds or

longer.

The “Noise Cut” setting window will be displayed.



Press





to select “Maximum” or “Medium,” and then press



ENT.



Press



STOP to exit the menu mode.

To cancel the noise cut function

Set “Noise Cut” to “OFF” in step



To set the noise cut function in the menu

Select and set “Noise Cut” from the tab of the menu.

Note

When playing back a music file in good sound quality, make sure to set “Noise Cut” to

“OFF.”

Summary of Contents for ICD-UX502











































































































Search results

Summary of Contents for ICD-UX502

Reviews:

Related manuals for ICD-UX502

Brands by name

Popular brands

Sony ICD-UX502, Operating Instructions Manual

Search results

Summary of Contents for ICD-UX502

Reviews:

Related manuals for ICD-UX502

Brands by name

Popular brands