Sony ICD-UX502 Operating Instructions Manual Download

Page: 14 / 106

Preparing the Recorder

ModelName: ICD-UX502

PartNumber: 4-421-477-11

Preventing Unintentional Operations (HOLD)

You can disable all the buttons (HOLD) in order to prevent unintentional

operations when you carry the IC recorder, etc.

To disable the button operations (HOLD status)

Slide the HOLD•POWER switch in the direction of “HOLD” to disable the

buttons while the power is on.

“HOLD” will appear for approximately 3 seconds, indicating that all the button

operations are disabled.

To enable the button operations

Slide the HOLD•POWER switch towards the center.

Note

When the HOLD function is activated during recording, all the button operations are

disabled. To stop recording, cancel the HOLD function first.



Hint

Even if the HOLD function is activated, you can stop the alarm playback by pressing any

button. (You cannot stop normal playback.)

Summary of Contents for ICD-UX502











































































































Search results

Summary of Contents for ICD-UX502

Reviews:

Related manuals for ICD-UX502

Brands by name

Popular brands

Sony ICD-UX502, Operating Instructions Manual

Search results

Summary of Contents for ICD-UX502

Reviews:

Related manuals for ICD-UX502

Brands by name

Popular brands