Sony ICD-TX800, Help Manual

Page: 105 / 210

Help Guide
IC Recorder
ICD-TX800
Dividing a file at all the track mark points
You can divide a file at all the track mark points.
Operate the remote control and follow the steps below:
Note
You cannot divide a protected file. To divide a protected file, remove the protection from the file first, then divide the file. For
instructions on removing protection, see
Protecting a file .
Track marks located near the beginning and end of the source file may not be used for dividing and remain in the divided files.
Hint
To cancel the dividing process, select “No” in step 3, and then press .
Related Topic
Selecting a file
Dividing a file at the current playback point
4-699-323-32(1) Copyright 2017 Sony Corporation
Operate the remote control to select the file that you want to divide.
1
While playback is on standby, select “Divide” - “At All Track Marks” from the OPTION menu, and then press
.
“Divide at All Track Marks?” appears on the display window.
2
Press or to select “Yes,” and then press .
“Please Wait” appears and the file will be divided at all the track mark points, deleting all the track marks. The
divided files will be suffixed with a sequential number (“_01,” “_02,” and so on).
A. Before dividing a file: indicates a track mark point.
B. After erasing track marks: A file is divided at all the track mark points, and the divided files will be suffixed with a
sequential number (“_01,” “_02,” and so on).
3
105