Recording Files
ModelName: ICD‑TX50
PartNumber: 4‑300‑042‑11(1)
Basic Recording
STOP
POWER•HOLD
/ENT
REC/PAUSE
Recording indicator/
Operation Indicator
Built-in microphones (L/R)
The following are the basic recording procedures using the specified
microphone sensitivity and recording mode.
Note
Noise may be recorded if an object, such as your finger, etc., accidentally rubs or scratches
the IC recorder during recording.
Hint
Before you start recording, we recommend you make a trial recording first, or monitor the
recording (
p. 36).
Slide the POWER•HOLD switch in the direction of “POWER” to turn
on the IC recorder (
p. 20), or towards the center to release the IC
recorder from the HOLD status (
p. 16).
The stop mode window appears.
Select the desired destination folder in the menu (
Tip
If you do not set a destination folder, a file will be recorded in “FOLDER01” in the
“ Recording Files” category of the built‑in memory or the microSD card.
To record with the IC recorder in a shirt
pocket, place the IC recorder in the pocket,
secured with the clip.
Recording Files
Continued