manualshive.com logo in svg

Sony ICD PX720 - 1 GB Digital Voice Recorder, Operating Instructions Manual

Share
Download
Sony ICD PX720 - 1 GB Digital Voice Recorder Operating Instructions Manual Download Page 72

ICD-PX720  4-113-173-11(1)

GB

For Windows Vista

1 

Click [Start] 

–

 [Control Panel] 

– 

[Programs], then select and click 

[Uninstall a Program] from the 

category.

2 

Select [Digital Voice Editor 3] from the 

list and click [Uninstall].

3 

Click [Continue] in the [User Account 

control] window. 

4 

Follow the instructions on the screen.

Note

If you wish to move the software to another 

drive or directory after it is installed, you must 

uninstall the software first, then re-install it. The 

software does not work properly if you just 

move the software files.

Tip

Uninstallation does not remove the message 

files.

Connecting the IC recorder 

to your computer

You can transfer the IC recorder data 

onto your computer by connecting the 

IC recorder to the computer. 

Use the USB connecting cable supplied 

with the IC recorder to connect the 

 (USB) connector of the IC recorder and 

your computer.

The IC recorder is recognized by 

the computer as soon as the cable 

is connected. You can connect or 

disconnect the cable when the IC 

recorder and the computer are turned 

on or off.

To 

 (USB) 

connector of 

IC recorder

To USB 

connector 

of your 

computer 

Connecting 

cable (supplied)

Summary of Contents for ICD PX720 - 1 GB Digital Voice Recorder

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands