ICD-SX750 4-157-612-13(1)
GB
Re
co
rd
in
g
1
Set “REC LEVEL” to “MANUAL” in the
menu.
For details, see “Setting the Recording
Level” (page 33).
2
Select a folder.
Press /MENU to display the folder
selection window.
Press
or
to select the
folder in which you want to record
messages, then press
.
3
Press and hold
(record/pause).
The IC recorder enters the record
standby mode. When you speak into
the microphone, the level meter in the
display window moves.
4
Press
or
to adjust the
recording level, depending on the
sound source.
Adjust the maximum level of the
sound to be recorded to about –12 dB
on the level meter, according the
sound source.
If “
” is displayed, press
or
and adjust the recording level
down so that “
” is not displayed, to
prevent sound distortion.
OVER indicator
Adjust the maximum
level of the sound to
about –12 dB.
Press and hold
or
to change
the sound level continuously. The
sound level is also displayed as a
number below the level meter.
5
Make other settings for recording
such as “LIMITER,” “LCF (LOW CUT),”
etc., in the menu.
6
Start recording.
Press
(record/pause).
The operation indicator lights in red
and “
” is displayed.
You do not need to press and hold
(record/pause) while recording.
Speak into the built-in microphone.
7
Press
(stop) to stop recording.
