ICD-SX750 4-157-612-13(1)
GB
When you press and hold
(record/
pause), the IC recorder enters the
recording pause mode.
The new message will be
automatically recorded after the last
recorded message.
Speak into the built-in microphones.
3
Press
(stop) to stop recording.
The IC recorder stops at the beginning
of the current recording.
Tips
Before you start recording, we recommend
you make a trial recording first.
When you purchase the IC recorder, there
are 5 folders already available, and you can
record up to 999 messages in each folder.
You can make new folders or delete
unwanted folders using the supplied Digital
Voice Editor software (page 101).
While recording, you can lock all the
functions of all the buttons so that you can
prevent inadvertent operations, by sliding
the HOLD switch in the direction of the
arrow.
Notes
You cannot record a message in a
folder
transferred from a computer. If you press
(record/pause) when you have selected
a
folder, the folder will be automatically
switched to a
folder in which a message
can be recorded, and the message will be
recorded as the last one in the folder.
While the operation indicator is flashing or
is lit in red or orange, do not remove the
batteries or connect or disconnect the USB
AC adaptor. Doing so may damage the data.
Noise may be recorded if an object, such
as your finger, etc., accidentally rubs or
scratches the IC recorder during recording.
Before making a recording, be sure to
check the remaining power of the batteries
(page 16).
When “REC LEVEL” is set to “LOW ,” “HIGH ,”
“S-HIGH ,” or “MUSIC ,” the limiter function
does not work.
To avoid replacing batteries during a long
recording session, use a USB AC adaptor (not
supplied) (page 125).
The maximum recording time varies if you
record messages in different recording
modes.