Sony IC RECORDER ICD-SX750 User Manual Download

Page: 15 / 136

ICD-SX750 4-157-612-13(1)

ett

g S

rte

Computer

While the batteries are charging,

“CONNECTING” and the battery indicator

are displayed in an animation.
When the battery indicator indicates “

,”

charging is completed. (Charging time:

approx. 4 hours*)
When you use the IC recorder for the

first time, or after you have not used the

IC recorder for a certain period of time,

it is recommended that you charge

the batteries continuously until “

” is

displayed.
If the battery indicator is not displayed,

charging has not been done properly.

Proceed from step 1 again.

* This is an approximation for the time it takes

to charge from no remaining battery power

to full battery power at room temperature.

It varies depending on the remaining power

and the condition of the batteries. It also

takes more time if the temperature of the

batteries are low, or if the batteries are

charged while you are transferring data to

the IC recorder.

Disconnecting the IC

recorder from your

computer

Follow the procedures below; otherwise,

data may be damaged.

Make sure that the operation

indicator is not flashing.

Disconnect the USB connecting

cable connected to the IC recorder

from the USB port of the computer.

On the Windows screen, left-click

“Safely Remove Hardware” on the

taskbar, and click “Safely remove USB

Mass Storage Device.”
On the Macintosh screen, drag the “IC

RECORDER” on the desktop to “Trash”

and drop it there.

(USB)

connector

IC recorder

USB connecting cable

To USB port of

your computer

Summary of Contents for IC RECORDER ICD-SX750









































































































































Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands

Sony IC RECORDER ICD-SX750, User Manual

Search results

Summary of Contents for IC RECORDER ICD-SX750

Reviews:

Related manuals for IC RECORDER ICD-SX750

Brands by name

Popular brands