Sony HXR-NX5R Operating Manual Download Page 81

Page: 81 / 148

Edi
ting

Editing

Protecting movies
(Protect)

Protect movies to avoid deleting them by
mistake.

Press the MENU button when the
THUMBNAIL screen is displayed.

Select

(EDIT)

[PROTECT].

Select the movie to be protected.

is displayed on the selected images.

• Press the DISPLAY button to preview the

image. Press

to return to the previous

screen.

• You can select up to 100 images at one time.

Select ,

successively,

according to the screen display.

To undo the protection

Select a movie marked with

in step

disappears.

Dividing a movie

You can divide a movie at a designated
point.

Press the MENU button while
playing back movies.

Select

(EDIT)

[DIVIDE].

Select

at the point where you

want to divide.

Select ,

successively,

according to the screen display.

Notes

• Dividing movies is supported for AVCHD only.
• You cannot restore movies once they are

divided.

• Do not remove the battery pack, the AC Adaptor

or the memory card that contains the movies
from your camcorder during the operation. It
may damage the memory card.

• A slight time difference may occur between the

point where you touch

and the actual

dividing point, as your camcorder selects the
dividing point based in about half-second
increments.

After you select the point with

, make

fine adjustment with these buttons.

Returns to the beginning of the selected
movie.

Summary of Contents for HXR-NX5R





















































































































































Search results

Summary of Contents for HXR-NX5R

Reviews:

Sony HXR-NX5R, Operating Manual, Page: 81 / 148

Search results

Summary of Contents for HXR-NX5R

Reviews: