Sony HXR-NX5R, Operating Manual, Page: 68 / 148

68
Configuring a wireless LAN
You can connect the camcorder to a
network using a wireless LAN.
You can connect the camcorder and an
access point using a wireless LAN.
1
Press the MENU button.
2
Select (NETWORK SET)
t
[Wi-Fi SET]
t
[ACCESS POINT
SET].
After a short delay, a list of access
points that can be connected is
displayed.
3
Select an access point to register.
If an access point you want to register is
not displayed, select [Manual setting]
and configure settings manually (p. 70).
4
Enter the password, and select
[Next].
Password entry is not required for
access points that do not display
.
5
Configure the access point
settings.
IP address
Select the IP address configuration
method.
When [Manual] is selected, enter the IP
address configuration items displayed
on the screen, and select [OK].
Priority Connection
Select whether to configure connection
priority for access points.
z
Tip
• Selecting [DNS server setting] on the IP
ADDRESS SET screen will display the DNS
server setting screen.
6
Select [Register].
• Connection to the access point is
initiated.
• [Registered.] appears when the access
point is registered successfully. The
SSID of the registered access point is
also displayed.
7
Select
t
, and press the
MENU button to close the menu
screen.
You can register an access point quickly if
the access point supports the WPS function.
1
Turn on the access point.
2
Turn on the camcorder.
3
Press the MENU button.
4
Select (NETWORK SET) t
[Wi-Fi SET] t [WPS].
After a short delay, the following screen
appears.
Selecting and registering an
access point
Registering an access point
using the WPS function