Sony HXR-NX5R Operating Manual Download Page 60

Page: 60 / 148

Connecting to a monitor or a TV

Playback image quality depends on the type of monitor or TV, and the jacks used to make the
connection.

Notes

• Video signals cannot be output from the output jacks above simultaneously.
• Make sure that the Earth connection between the camcorder and external devices is securely grounded

before turning on the power.
(It is recommended that the camcorder and external devices be turned on after connecting the 75

coaxial cables.)
If you need to connect an external device with devices in the powered state, connect the 75

coaxial

cable to the external device and then connect to the camcorder.

Select

(REC/OUT SET)

[VIDEO OUT]

[OUTPUT SELECT]

[OUTPUT

SELECT]

desired output destination.

Selecting jacks for external output

To audio input
jack
To video input
jack

HDMI cable (sold separately)

Audio cable (sold separately)

Signal flow

Video cable (sold separately)

To HDMI input
jack

SDI cable (sold separately)

To SDI input jack

Summary of Contents for HXR-NX5R





















































































































































Search results

Summary of Contents for HXR-NX5R

Reviews:

Sony HXR-NX5R, Operating Manual, Page: 60 / 148

Search results

Summary of Contents for HXR-NX5R

Reviews: