Sony HXR-NX200 Operating Manual Download Page 87

Page: 87 / 122

Us
in

th
e

Displays the audio level meters on the
LCD screen.

OFF

Does not display the audio level meters.

Tip

• You can assign this function to an ASSIGN

button (p. 58).

BAR

Displays a bar that indicates the zoom
position.

NUMBER

Displays a number that indicates the zoom
position.

METER

Displays the focal length in meters.

FEET

Displays the focal length in feet.

SECOND

Displays the shutter display in seconds.

DEGREE

Displays the shutter display in degrees.

The shutter speed equal to the period that
your camcorder reads image data from the
image sensor is defined as 360 degrees. The
degree is calculated based on this definition
and displayed.

– With a frame rate of 50 selected in [REC

FORMAT], when the shutter speed is 1/50,
the shutter angle is 360 degrees.

– With a frame rate of 25 selected in [REC

FORMAT], when the shutter speed is 1/25,
the shutter angle is 360 degrees.

See page 36 for details on the [REC
FORMAT] setting.

Note

• When you press the ASSIGN button to which

[DATA CODE] is assigned, the shutter speed is
displayed in seconds regardless of this setting.

Tip

• If the shutter speed is more than 360 degrees, it

is displayed as an integral multiple of 360
degrees (360 × 2, etc.).

You can select the information that is
displayed during playback.

OFF

No information is displayed.

DATE/TIME

The date and time are displayed.

CAMERA DATA

Camera data is displayed.

Tip

• You can assign this function to an ASSIGN

button (p. 58).

• When DISPLAY OUTPUT is set to LCD

PANEL, some information still appears on the
external output.

AUDIO LEVEL DISPLAY

ZOOM DISPLAY

FOCUS DISPLAY

SHUTTER DISPLAY

Audio level meters

DATA CODE

Continued

Summary of Contents for HXR-NX200



























































































































Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands

Sony HXR-NX200, Operating Manual

Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands