Sony HXR-NX200 Operating Manual Download Page 32

Page: 32 / 122

Press the zoom lever

slightly to zoom

slowly, and press it further to zoom more
quickly.

Tips

• When focusing, the minimum distance required

between the camcorder and the subject is about
1 cm (about 13/32 in.) for wide angle and about
1 meter (about 39 3/8 in.) for telephoto.

• The focus may not be adjusted at certain zoom

positions if the subject is within 1 meter (about
39 3/8 in.) from your camcorder.

• Be sure to keep your finger on the power zoom

lever

. If you remove your finger, the

operation sound of the power zoom lever

may also be recorded.

Press the handle zoom lever

to zoom in

or out.

Tip

You can turn the handle zoom function on/off,
and change the zoom operation speed ([HANDLE
ZOOM], p. 78).

You can zoom at the desired speed by
turning the zoom ring

. Fine adjustment

is also possible.

Note

• Turn the zoom ring

at a moderate speed. If

you turn it too fast, the zoom may lag behind the
zoom ring rotation, or the operation sound of the
zoom may also be recorded.

Adjusting the zoom

Adjusting the zoom with the power
zoom lever

Wide angle
view: Wide

Close view:
Telephoto

Adjusting the zoom with the handle
zoom

Adjusting the zoom with the zoom
ring

Recording (Continued)

Summary of Contents for HXR-NX200



























































































































Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands

Sony HXR-NX200, Operating Manual

Search results

Summary of Contents for HXR-NX200

Reviews:

Related manuals for HXR-NX200

Brands by name

Popular brands