1
G
etting star
ted
US
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM” battery pack (L series) after attaching it to your
camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery pack other than the L series to your camcorder.
1
Slide the POWER switch to OFF (CHG) (the default setting).
2
Attach the battery pack to your camcorder.
Attach the battery pack by sliding it in the direction of the arrow while pressing it until
it clicks.
3
Connect the AC Adaptor to the DC IN jack of your camcorder. Be sure that
the
mark on the DC plug is facing to the
mark on your camcorder.
4
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off
when the battery pack is fully charged.
Battery pack
DC IN jack
DC plug
Power cord
(Mains lead)
To the wall outlet
(wall socket)
AC Adaptor
CHG (charge) lamp
POWER switch
Align the
mark on the DC
plug with that on the DC
IN jack.