46
Chapter 2
Playback and Recording
Ch
apt
e
r 2
P
la
yb
ac
k
a
n
d
Re
co
rd
in
g
Using the Unit as a Videocassette Recorder
This section describes the connections, settings and
operations necessary to perform recording on the
unit. The same settings and operations apply when
you are using the unit for dubbing.
For details on connections of the player and the unit,
refer to the instruction manual of the player.
For details, see also page 65 and 66.
To video equipment without an i.LINK jack
You can connect the unit to video equipment without an
i.LINK jack. Use the unit as a recorder as follows.
Connect either an S-video cable or a video cable.
Note
Connections for Recording
Player
Monitor
HVR-M25A (rear panel)
To S-video output
To video output
To audio output
S-video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
: Signal flow
Monitor
