Sony HVO1000MD, User Manual, Page: 89 / 148

89
Device Settings
C
h
ap
te
r 6
Sys
te
m
A
d
m
in
istr
a
to
r S
e
tti
n
g
s
[Select Right/Left of Image]
Specify the image to use for the 2D recorded data
when recording 3D and 2D images simultaneously,
and which still image to use for printing and displaying
thumbnails.
The default setting is [Left].
3
When you finish configuration, use the
V
,
v
,
B
, and
b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [System Admin
Settings] screen appears again.
Device Settings
Configure settings for external devices.
1
In the [System Admin Settings] screen, use the
V
,
v
,
B
, and
b
buttons to select [Device Settings], and press
the ENTER button.
The [Device Settings] screen appears.
2
Use the
B
and
b
buttons to select a tab, and configure
settings as necessary.
For details on each tab, see the following.
“[Device] Tab” (page 90)
“[Contact Switch] Tab” (page 95)
3
When you finish configuration, use the
V
,
v
,
B
, and
b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [System Admin
Settings] screen appears again.