Sony HVO1000MD, User Manual, Page: 79 / 148

79
Function Settings
C
h
ap
te
r 6
Sys
te
m
A
d
m
in
istr
a
to
r S
e
tti
n
g
s
[Add 0 to Patient ID]
Select whether to add zeros to patient IDs with lengths
shorter than the specified number of digits in the
setting screen that appears, and press the ENTER
button.
[Patient Name Field]
Select the number of display fields for the patient
name in the setting screen that appears, and press the
ENTER button.
If you select [2] or [3], the patient name field will be
separated into first, middle, and last names.
The default setting is [1].
[Change Patient Info.]
Select whether to allow changes to patient information
at any time in the setting screen that appears, and press
the ENTER button.
The default setting is [No].
3
To configure settings in other tabs, use the
V
,
v
,
B
,
and
b
buttons to select a tab.
If you are finished configuring [Function Settings],
use the
V
,
v
,
B
, and
b
buttons to select [Apply], and
press the ENTER button to save the configurations.
[General 2] Tab
Configure initial system settings.
1
Use the
B
and
b
buttons to select the [General 2] tab.
2
Configure each setting.
Select an item using the
V
and
v
buttons, and press the
ENTER button to display the setting screen for that
item.
[Auto Eject BD/DVD]
Select whether to automatically eject BD and DVD
discs when they are full in the setting screen that
appears, and press the ENTER button.
The default setting is [No].
[Prohibit Remote Control]
Select whether to prohibit remote control of the unit in
the setting screen that appears, and press the ENTER
button.
The default setting is [No].