Sony HVO1000MD User Manual Download Page 41

Page: 41 / 148

Step 2 Quick Playback

Chapt

Bas

Rec

er Ope

rat

ion
s

“REC” appears on the front panel display of the unit
while recording is in progress.

If images are recorded and patient information has not
been entered in the [Recording Preparation] screen,
sequential patient IDs will be automatically assigned.
The letter “U” appears at the beginning of
automatically assigned patient IDs.

Press the

STOP button to stop recording.

Infrared remote control unit

Front panel

Recording stops, and the following appears.

If you press the

REC button again, recording will start

again as a new recorded data entry.

Step 2 Quick Playback

Play back data recorded in Step 1.

What is quick playback?

“Quick playback” is a function that allows you to play
back the most recent data recorded to the internal hard disk
with a simple press of the

PLAY button.

• If the most recent data recorded is a still image, playback

will not occur.

• For the HVO-3000MT, when you play back recorded

data that contains both 3D and 2D data, the 3D recorded
data will be played back.

Press the

PLAY button.

Infrared remote control unit

Front panel

The most recent recorded data plays back.
The following appears during playback.

Note

REC 00:00:10
1234567890123456

This appears when audio is
also being recorded.

Patient ID

STOP button

END
1234567890123456

Notes

PLAY button

Summary of Contents for HVO1000MD





















































































































































Search results

Summary of Contents for HVO1000MD

Reviews:

Sony HVO1000MD, User Manual, Page: 41 / 148

Search results

Summary of Contents for HVO1000MD

Reviews: