manualshive.com logo in svg

Sony HVO1000MD, User Manual, Page: 120 / 148

Share
Download
Sony HVO1000MD User Manual Download Page 120

120

Overview / Configuring Touch Panel / Mouse Settings

  Chapt

er

 7

  T

ouc

h Pa

nel and

 Mo
us
e

Chapter

7

Touch Panel and Mouse

Overview

You can connect a commercially available touch panel 
monitor or mouse to the HVO-1000MD or HVO-3000MT, 
and use them to operate the menu screens.
This chapter describes the settings for using a touch panel 
or mouse, and the screens that appear during touch panel 
or mouse operations.

For details on supported touch panel monitors, contact 
your local Sony representative.

Configuring Touch Panel / 
Mouse Settings

Configure the following settings to enable use of a touch 
panel monitor or mouse.

• You must restart the unit after enabling the touch panel / 

mouse mode.

• During touch panel / mouse mode, the 

V

, 

v

, 

B

, and 

b

 

arrow buttons and the ENTER and MENU buttons on the 
front panel of the unit and on the infrared remote control 
unit are disabled.

1

Press the MENU button.

The [MENU] screen appears.

2

Use the 

V

 and 

v

 buttons to select [Settings], and press 

the ENTER button.

The [Settings] screen appears.

Note

Notes

Summary of Contents for HVO1000MD





















































































































































Reviews:

No comments