Sony HVO1000MD, User Manual, Page: 117 / 148

117
DICOM Settings
C
h
ap
te
r 6
Sys
te
m
A
d
m
in
istr
a
to
r S
e
tti
n
g
s
Editing Procedure Names
1
Use the
V
,
v
,
B
, and
b
buttons to select a procedure to
rename, select [Edit], and then press the ENTER
button.
The [Edit] screen appears.
2
Rename the procedure, select [Apply], and then press
the ENTER button.
The configuration is saved.
Deleting Procedures
1
In the [Edit Case List] screen, use the
V
,
v
,
B
, and
b
buttons to select a procedure to delete, select [Delete],
and then press the ENTER button.
The procedure is deleted.
2
Use the
v
button to select [Apply], and press the
ENTER button.
The configurations are saved, and the [System Admin
Settings] screen appears again.
DICOM Settings
Configure settings that are necessary for DICOM
transmissions of still images.
1
In the [System Admin Settings] screen, use the
V
,
v
,
B
, and
b
buttons to select [DICOM Settings], and
press the ENTER button.
The [DICOM Settings] screen appears.
2
Use the
B
and
b
buttons to select a tab, and configure
settings as necessary.
For details on each tab, see the following.
“[Server] Tab” (page 118)
“[Local] Tab” (page 118)
3
When you finish configuration, use the
V
,
v
,
B
, and
b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [System Admin
Settings] screen appears again.