Sony HVO1000MD, User Manual, Page: 110 / 148

110
Editing the Doctor List
C
h
ap
te
r 6
Sy
ste
m
A
d
m
ini
st
ra
to
r S
e
tti
n
g
s
3
Use the
B
and
b
buttons to select a tab, and configure
settings as necessary.
For details on each tab, see the following.
“[General] Tab” (page 110)
“[File Server] Tab” (page 110)
“[Streaming] Tab” (page 112)
“[Print] Tab” (page 112)
4
When you finish configuration, use the
V
,
v
,
B
, and
b
buttons to select [Apply], and press the ENTER
button.
The doctor information is added.
[General] Tab
Configure general settings such as the doctor name and
storage destination.
1
Use the
B
and
b
buttons to select the [General] tab.
2
Configure each setting.
Select an item using the
V
and
v
buttons, and press the
ENTER button to display the setting screen for that
item.
The [No.] setting is assigned automatically and cannot
be changed.
[Name]
Enter the name of the doctor (up to 20 characters)
using the on-screen keyboard.
For details on using the on-screen keyboard, see
“Using the On-Screen Keyboard” (page 35).
[Video Quality]
Select the video image quality in the setting screen that
appears, and press the ENTER button.
[External Media 1], [External Media 2]
Select the external storage destinations in the setting
screens that appear, and press the ENTER button.
If [Simultaneous 3D and 2D Rec] is set to [Yes] in the
[3D/2D Settings] screen, recordings will only be saved
to one external media destination. Therefore, the
[External Media 2] setting will be ignored, even if it is
configured.
3
When you finish configuration, use the
V
,
v
,
B
, and
b
buttons to select [Apply], and press the ENTER
button.
The [Edit Doctor List] screen appears again.
[File Server] Tab
Configure server settings.
1
Use the
B
and
b
buttons to select the [File Server] tab.
2
Configure each setting.
Note