manualshive.com logo in svg

Sony HVO1000MD, User Manual, Page: 88 / 148

Share
Download
Sony HVO1000MD User Manual Download Page 88

88

3D/2D Settings (HVO-3000MT only)

  C
h

ap
te

r 6

  

Sy
ste
m

 A
d

m

ini

st

ra

to

r S
e

tti

n

g

s

• You must restart the unit after changing the system 

mode. A message prompting you to restart the unit 
will appear in such cases. Select [Yes] and restart the 
unit.

• In 3D mode, an icon appears in the [MENU] screen 

to indicate that 3D mode is set.

[Simultaneous 3D and 2D Rec]

Select whether to record 3D and 2D images 
simultaneously in the setting screen that appears.
The default setting is [No].

• When recording 3D and 2D images simultaneously, 

be sure to configure the same input signal and 
resolution for both.

• This setting is only available when [System Mode] 

is set to [3D].

[Input Stream]

Select the number of input streams and the input 
format for when the system mode is set to [3D].
The default setting is [2].

• This setting is only available when [System Mode] 

is set to [3D].

• When [Input Stream] is set to [2] and you capture a 

still image from a fast-moving video, the image may 
not be perceived as 3D.

• When the number of input streams is set to [1 (Line 

by Line)], images will be recorded in top-and-
bottom format.

[Output Mode]

Select the output mode for when the system mode is 
set to [3D].
The settings available for the output mode will differ 
depending on the format configured for the input 
streams.

Selectable output modes

• This setting is only available when [System Mode] 

is set to [3D].

• When recording 3D and 2D images simultaneously, 

3D images that conform to this setting will be 
output.

[Display MENU]

Select whether to display the MENU in 2D mode or 
3D mode.

This setting is only available when [System Mode] is 
set to [3D].

Notes

Notes

Notes

Input stream

Output modes

Remarks

2

Side by Side 
(default)

Line by Line

1
(Side by Side)

Side by Side 
(default)

Pass-through 
output possible

Line by Line

1
(Line by Line)

Line by Line 
(default)

Pass-through 
output possible

Top and Bottom

Notes

Note

Summary of Contents for HVO1000MD





















































































































































Reviews:

No comments