manualshive.com logo in svg

Sony HVO1000MD, User Manual, Page: 126 / 148

Share
Download
Sony HVO1000MD User Manual Download Page 126

126

Screen Displays in Touch Panel / Mouse Mode

  Chapt

er

 7

  T

ouc

h Pa

nel and

 Mo
us
e

[Image List] Screen

A

Thumbnail display selection buttons

Select the type of image for which to display thumbnails.
The buttons will be enabled or disabled with each touch.
If you touch and enable both [Video] and [Still] (i.e., both 
are green), thumbnails for all videos and still images will 
be displayed.

B

Thumbnails

Touch a thumbnail to start playback.

C

Scroll bar

For details on operations, see “

3

 Scroll bar” under 

“[Recording List] Screen” (page 125).

D

Control buttons

Executes the corresponding operations for the selected 
recorded data items (i.e., selected check boxes).

E

Check boxes

Select the checkboxes of the recorded data items for which 
you want to perform operations.
The check boxes will be selected or cleared with each 
touch.

1

4

5

2

3

Summary of Contents for HVO1000MD





















































































































































Reviews:

No comments